Toward Resilient Self-Driving Laboratories through Telerobotic Interventions

Published
Source
arXiv
Paper number
1473
Field
Robotics
arXiv ID
2611.18496

Key points

  • The authors built a teleoperation interface that controls a six-degree-of-freedom robotic arm (UR3e) with a 3D mouse for fault recovery in self-driving laboratories.
  • Six participants performed a total of 86 trials across three simulated fault scenarios: process interruption, initialization error, and escalated fault.
  • The decoupled controller achieved higher success rates than the coupled mode and reduced task completion time by a mean of 25.6 s.
  • The decoupled mode produced a mean paired difference of -3.99 rad in rotational motion relative to the coupled mode, with a large effect size (Cohen’s dz = -1.08).
  • Multi-waypoint reference-path guidance reduced task duration by a mean of 40.1 s and path length by a mean of 218 mm relative to unguided operation.
  • As a limitation, the participant count of 6-8 was small, and guided trials followed unguided trials, so practice effects were not fully separated.

Paper links

External research summaries. These are not HDATF publications or measured product results.

Read original (opens in a new tab)